| ITEM |
DESCRIPTION |
REF# |
|
| 1 |
OVERHAUL REPAIR KIT KIT |
|
|
| |
(INCLUDES: FRONT & REAR BEARINGS & CUPS, FRONT
|
|
|
| |
BALL BEARING, GASKETS & OIL SEALS KIT, |
|
|
| |
NEEDLE BEARINGS & SMALL PARTS KITS) |
|
|
| |
WITH 1-1/8 ” INTERMEDIATE GEAR SHAFT |
D18A-BSG |
|
| |
WITH 1-1/4 ” INTERMEDIATE GEAR SHAFT |
D18B-BSG |
|
| 2 |
COMPLETE ASSEMBLED DANA-18 TRANSFER CASE
(While Supplies Last) |
937477 |
|
| |
INCLUDES DUAL SHIFTER KIT ALL 4 CYLINDERS WITH
|
|
|
| |
3 SPEED TRANSMISSION |
|
|
| 3 |
GASKETS, OIL SEALS & FELTS KIT |
923300 |
|
| 4 |
FRONT OUTPUT SHAFT |
807892 |
|
| 5 |
BALL BEARING, FRONT OUTPUT SHAFT |
A1007 |
|
| 6 |
SNAP RING, FRONT OUTPUT SHAFT BEARING |
A976 |
|
| 7 |
FELT FRONT OR REAR YOKE (2 NEEDED) |
932295 |
|
| 8 |
OIL SEAL, FRONT OR REAR YOKE (2 NEEDED) |
8123077 |
|
| 9 |
REAR OUTPUT SHAFT |
807767 |
|
| 10 |
BEARING CONE, FRONT OR REAR OUTPUT SHAFT (NEED
2) |
51575 |
|
| 11 |
BEARING CUP, FRONT & REAR OUTPUT SHAFT (NEED 2
) |
51577 |
|
| 12 |
BUSHING, FRONT OUTPUT SHAFT |
A987 |
|
| |
FRONT OUTPUT SHAFT SLIDING GEAR: |
|
|
| 13 |
39 TEETH COUNT (MARK 18-8-17) |
A15045 |
|
| |
33 TEETH COUNT (MARK 18-8-22) |
809290 |
|
| |
FRONT OUTPUT SHAFT GEAR: |
|
|
| 14 |
26 TEETH COUNT (MARK 18-8-18) |
A15044 |
|
| |
29 TEETH COUNT (MARK 18-8-24) |
809291 |
|
| 15 |
THRUST WASHER, FRONT OUTPUT SHAFT GEAR |
A990 |
|
| 16 |
SNAP RING, FRONT OUTPUT SHAFT GEAR |
A991 |
|
| 17 |
OUTPUT SHAFT HUB |
A992 |
|
| 18 |
INTERMEDIATE GEAR: |
|
|
| |
34X21 TEETH COUNT (MARK 18-5-7) |
642189 |
|
| |
39X18 TEETH COUNT (MARK 18-5-9) |
809293 |
|
| 19 |
SHAFT, INTERMEDIATE GEAR 3/4” |
A998 |
|
| 19 |
SHAFT, INTERMEDIATE GEAR 1-1/8 ” |
642188 |
|
| 19 |
SHAFT, INTERMEDIATE GEAR 1-1//4 ” |
942115 |
|
| 19A |
SHAFT, NEEDLES & WASHER KIT |
942115K |
|
| |
ROLLER BEARING, INTERMEDIATE GEAR SHAFT: |
|
|
| 20 |
WITH 3/4” SHAFT (CAGE BEARING, 2 NEEDED) |
A924 |
|
| |
WITH 1-1/8” SHAFT (CAGE BEARING, 2 NEEDED) |
642190 |
|
| |
WITH 1-1/4” SHAFT (NEEDLE BEARING, 48 NEEDED) |
809294 |
|
| 21 |
SPACER, INTERMEDIATE GEAR SHAFT |
809295 |
|
| |
THRUST WASHER, INTERMEDIATE SHAFT: |
|
|
| 22 |
FOR 3/4” SHAFT (NEED 2) |
A1000 |
|
| |
FOR 1-1/8” SHAFT (NEED 2) |
642191 |
|
| |
FOR 1-1/4” SHAFT (NEED 2) |
8121813 |
|
| 23 |
MAINSHAFT GEAR, 29 TEETH, 6 SPLINE |
809297 |
|
| 23 |
MAINSHAFT GEAR, 26 TEETH, 6 SPLINE |
937339 |
|
| 23 |
MAINSHAFT GEAR, 29 TEETH, 10 SPLINE |
947382 |
|
| 24 |
FRONT YOKE |
A1106 |
|
| 25 |
YOKE, REAR (MB, 2A, 3A, 3B, M38, M38A1 MODELS) |
116714 |
|
| 26 |
NUT FOR FRONT OR REAR YOKE (2 NEEDED) |
801367 |
|
| 27 |
SHIFT LEVER PIVOT PIN |
A972 |
|
| 28 |
SHIFT ROD OIL SEAL (2 NEEDED) |
A974 |
|
| 29 |
SHIFT FORK |
A959 |
|
| 30 |
SPEEDOMETER GEAR, 14 TEETH COUNT |
A1512 |
|
| 30 |
SPEEDOMETER GEAR, 15 TEETH COUNT |
A5707 |
|
| 31 |
SHIFTER BOOT, DUAL LEVER |
801058 |
|
| 35 |
SHIFT KNOB (EACH) |
914946 |
|
| 33 |
TRANSFER CASE MOUNT |
A-6156 |
|
| 34 |
REAR MOUNTING SUPPORT KIT BOLT & INSULATORS |
926671K |
|
